Expert Answers about Chevrolet Express Van

• Brake Controller and Wiring for a 2019 Chevy Express Van
• For your 2019 Chevy Express Van I recommend going with the Tekonsha Prodigy P3 # 90195 brake controller. This is a great brake controller that applies the brakes on your trailer at the same time and with the same intensity as the brakes on your van. The LCD screen is also a great feature that makes operation much easier than many other similar controllers. The wiring part will vary depending on what you already have installed on your vehicle. If your Express Van came with a 7-Way then...
  view full answer...


• How to Get Replacement Mounting Hardware for a Curt Trailer Hitch
• The square hole 1/2" washers you're referring too can be found in the replacement hardware kit # RHK. You'll just need to enter your hitch part number in the "Hitch Item Number" and we will send you an everything for an entire replacement kit, including the square washers.
  view full answer...


• Front Mount Hitch Option for 2005 Chevy Express 3500
• We don't offer a custom fit front mounted receiver that's compatible with a 2005 Chevy Express 3500, but a weld-on universal hitch like # 41990-07 which offers a 7 inch drop could work for you, but you might need to make some modifications to the fascia under the front bumper.
  view full answer...


• Recommended 7-Way Trailer Connector For A 2003 Chevrolet Express Van With Factory 4-Pole
• No problem! For your 2003 Chevrolet Express Van all you're going to need is the: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L. This adapter will plug into your existing 4-pole connector and provide your van with the needed 7-way connector without sacrificing your original connector. From here it would also be very highly recommended that you also install a brake controller. If you're open to suggestions, the Tekonsha Prodigy P2 Trailer Brake Controller # 90885...
  view full answer...


• Adding a Trailer Brake Controller to a 2004 Chevy Express Van 3500
• If your 2004 Chevy Express Van came with a factory installed 7-Way trailer connector then the blue output brake wire will already ran from the back to the front. It is located under the dash near the emergency brake pedal. It will connect to the broke controller blue wire. The white wire will go through the firewall and attach to the negative battery terminal. The black wire will go through the firewall, attach to a circuit breaker and then go from the circuit breaker to the positive battery...
  view full answer...


• Parts Needed to Install Brake Controller and Wiring on a 2017 Chevy Express 3500 Van
• I will be happy to help you find all of the parts you need to tow your trailer with brakes using your 2017 Chevy Express 3500 Van! To install a fully functional 7-Way connector, and ultimately a brake controller, on your Express Van you will need 4-Way wiring that carries the basic trailer light functions and the Universal Wiring Kit # ETBC7. For the basic light functions I recommend going with the T-One # 118392 which simply plugs in behind your tail lights (see attached installation...
  view full answer...


• Overall Width Of Buyer Products 3371801102 Trailer Hitch
• Per the manufacturer, The Buyers Product Hitch # 3371801102 overall width from mounting hole to mounting hole is 38-3/8 inches across from center on center. Then on each side starting with the hole that's towards the rear of the vehicle will measure 3-11/16 inches from the first to the center hole and 6-7/16 inches from first to the last hole.
  view full answer...


• Recommended Trailer Hitch Receiver and Vehicle Trailer Wiring for a 1997 Chevy Express Van
• The Draw-Tite Max-Frame Trailer Hitch Receiver # 75189 is confirmed to fit your 1997 Chevrolet Express Van. Since it sounds like you don't have the factory tow package you will want to go with the Curt T-Connector # C55335 for wiring. If your Van happened to have the factory tow package then you will use part # 118240 instead. If you just need the 4-Pole connector then I recommend also installing the Mounting Bracket 4-Pole Flat # 18144 along with the No-Drill Bracket # C57202 for a quick...
  view full answer...


• Recommended Suspension Enhancement System For A 2019 Chevrolet Express Van 3500 Cutaway
• When it comes to installing a suspension enhancement system on your 2019 Chevrolet Express Van 3500 Cutaway, I recommend The Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57205. This system has a load-leveling capacity up to 5,000 pounds, and has an adjustable air pressure between 5 psi to 100 psi. The kit will keep your vehicle level when you are hauling a heavy load which will improve steering and braking performance, help maintain safe headlight aim, and keeps your tires...
  view full answer...


• Parts Needed For Trailer Connector & Brake Controller On 2022 Chevrolet Express Van Factory Wiring
• First you will need to locate the brake controller wires in your 2022 Chevrolet Express van. One you have located the wires you will need to use a Test Light # PTW2993 to verify that the wiring is functioning properly. You should have a power wire, brake switch signal wire, ground wire and a wire going to the 7-way at the back of the vehicle. With all these functioning properly you will be able to connect a Tekonsha Prodigy P3 Trailer Brake Controller # 90195. If they are not functioning...
  view full answer...


• Brake Controller and 7-Way Installation in 2017 Chevrolet Express Van Without Tow Package
• On a 2017 Chevrolet Express Van that does NOT have the factory trailer connector a trailer brake controller install will usually be hardwired using our install kit # ETBC7 and a 4-pole harness like # 118392. These items allow complete installation of a trailer brake controller like the Prodigy P2 # 90885 and a 7-way socket, which is included in the install kit. No other items are needed. This kit bypasses any factory wiring and includes all required components for a complete brake controller...
  view full answer...


• Trailer Wiring Harness For A 2000 Chevrolet Express Van
• When it comes to installing a trailer wiring harness on your 2000 Chevrolet Express Van The T-One Vehicle Wiring Harness # 118377 is the best out of all the plug and play harnesses for your vehicle. The T-One harness are made out of a heavier gauge wire (16 gauge) and will last longer in the elements then the other options that we offer. The harness will plug into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your...
  view full answer...


• Front Suspension Enhancement For A 2008 Chevrolet Express Van With Camper Body
• Yes, The Timbren Front Suspension Enhancement System # TGMFK15A will work on your 2008 Chevrolet Express Van with camper body. These springs have a 14,000 pound capacity, and will provide a more comfortable ride by absorbing road shock and improving roll stability. They are easy to install with no drilling required. Using these springs will not affect the empty ride of your vehicle. I attached a review video link below.
  view full answer...


• Parts Needed To Install a Hayes Engage Trailer Brake Controller On a 2020 Chevy Express Van
• To install the Hayes Engage Trailer Brake Controller # HA81760 on your 2020 Chevrolet Express Van you will need the Wiring Adapter # HA81789-HBC. If your van included the 7-way wiring you will need to check for the wiring taped and tucked under the driver side floor mat up towards the firewall. If you can not find the wiring here you may also have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal. If your Express...
  view full answer...


• What Parts Are Needed To Install Tekonsha 9030 Brake Controller, # 39510, On 2000 Chevy Express Van
• It looks like you have all the parts listed you will need to put a 7-way trailer connector and install a brake controller on your 2000 Chevy Express Van. There is one more part you could use and that would be the Draw-Tite Plug-In Harness, # 20127. This is a 12 inch long harness that will plug into the plug on the Tekonsha brake controller and give you the 4 pigtail wires that will be hardwired to your vehicle. Using this harness will allow you to plug and unplug your brake controller...
  view full answer...


• Ball Mount For A Trailer That Has 4 Of Rise
• Since high-low adapters, like the Roadmaster High-Low Adapter for Tow Bars # RM-070 cannot be used to tow a trailer, I recommend getting a different ball mount to compensate for the needed 4" of rise. You can use the Curt Ball Mount for 2" Hitches # D-28, which offers 4" of rise, and 6" of drop, measures 14-1/4" long, and has a maximum weight capacity of 6,000-lbs.
  view full answer...


• Parts Needed to Install a 7 and 4-Way Trailer Connector on a 2004 Chevy Express Van 3500
• If your 2004 Chevy Express van came with a factory installed 7-Way connector and you need to replace it then you can use connector # HM40975 which will provide both a 7-Way and4-Way connector. But if your van did not come with a factory installed 7-Way the wiring for this connector may not be present. If you do not have any trailer wiring at all on your van then to add a 7 and 4-Way you will need to start by installing a 4-Way flat connector, # 118392. Then to add the 4/7-Way you will...
  view full answer...


• What Cab Floor Mats do You Recommend for a 2019 Coachmen Leprechaun 260DS?
• I have a great solution for you. Unfortunately, you do not carry custom-fitted mats for your 2019 Coachmen Leprechaun 260DS. However, I recommend the Hopkins Semi-Custom Auto Floor Mats - PVC - Front - Black # HM79140. The mats include double-layer heel guards on each mat helps minimize wear and tear. Since the floor mats are not a fully-customized kit, there may be some cutting required.
  view full answer...


• Parts Needed for an Electric Brake Controller on a 2017 Chevrolet Express 2500 Van
• I can definitely get you set up with an electric brake controller and 7-way for your 2017 Chevrolet Express 2500 Van. If you do not already have a 4-way connector at the back of your van then you will need to start there. The 4-way is what will be adapted in order to get a 7-way connector. If you don't already have a 4-way I recommend the T-One Vehicle Wiring Harness # 118392. This will provide you with a 4-way connector and plugs into your vehicle's wiring harness, which is located behind...
  view full answer...


• Parts Needed to Add a Brake Controller to a 2014 Coachman Class C Motor Home on Chevy Van Chassis
• If your motor home, built on the Chevy Van chassis, came with a factory installed 7-Way trailer connector then it should have a tow package wire bundle up under the dash, to the left of the steering wheel, and held together with a white tag. Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall. Pull down the wire bundle and look at the tag. It should have the wire functions listed to make attaching them to a brake controller...
  view full answer...